※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of the ReSona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Comes with casters Hayami's 5-tier vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm weight 58 kg
It is one of Monster Cable's representative works that uses an unprocessed time correction structure at the 3.0 m and 1.9 m pair end of the speaker cable, and is quite thick with a conductor system of 3 mm. It is a cable with large changes in sound quality that can easily produce a sense of volume of bass (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
Maintained! Stereo power amplifier equipped with output impedance control. It is a power amplifier from the heyday of separation, which is supported by a solid power supply unit and chassis, and can firmly reproduce even the smallest nuances. There are dullness and small scratches on the exterior (Tomonori Asae)
Maintenance information: 2024.5.9 Maintained (replacement of defective output relay contacts. Replace deteriorated capacitors in the power supply circuit. (Repair and adjustment within each circuit)
Accessories: none
Main specifications: rated output 120W+120W (8Ω Class B) 30W+30W (8Ω Class A) rated power consumption 330W W435 × H146 × D381 mm 21kg
Maintained! The balance between thickness and sharpness of the sound is good, and the sound conveys the breath of jazz and rock. The thick sound image and rich mid-range, which cannot be enjoyed with today's amplifiers, are exquisite. The range is moderate but the Old McKinn sound has instantaneous power. The slightly smokier tone than the MC2500 is attractive. As for the exterior, in addition to wear and tear and dullness over time, yellowing can be seen. Serial 5Y353 (Yamato Yuki)
Maintenance information: 2024.5.9 maintained (power stage Tr short, output boat, Tr in input board, capacitor, lamp broken, RCA, switching SW replacement SW, VOL cleaning, input shield cable ground solder treatment)
Accessories: Power cord, copy of English instruction manual
Main specifications: 300W+300W (mono 600W) 0.5 to 16 ohms W483 x H267 x D432 mm 58.1 kg
Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug has no prominent characters, and it is a cable that allows you to enjoy music naturally. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Balance cable, 3.0 m pair, oxygen-free copper, OFC Ritz line type, 2-core shield structure, a quiet, and beautiful sound without falsehood. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of Revisona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
Maintained! *Remote control is out of stock. A control amplifier that inherits the sound of Yamaha's famous C2a. It uses a highly reliable phono equalizer, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. There is overall dullness and small scratches (Tomoho Asaine)
Maintenance Information: 2023.12.8 Maintained (PHONO circuit repair adjustment. Power supply circuit input circuit and other circuit board soldering correction. Disassemble the PHONO switch and polish the contacts and apply contact cleaner. Contact correction for other volume types. (Long time sound check)
Accessories: copy of the manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
It's cheap because it's in poor condition! *Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. On the exterior, in addition to a feeling of use such as dullness and small scratches, some terminals are damaged (Asaine Tomoho)
Maintenance information: 2024.5.9 operation confirmed
Accessories: none
Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
High-purity OFC (oxygen-free copper/4N) is used as the 0.5m pair conductor of the XLR cable to achieve transparent sound. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none